top of page
ΜΟΥΡΕΛΟΜΗΧΑΝΗ LTV621

LTV 621

The vertical edge polisher for round and straight edges up to a 6 cm thickness

LTZ

THE HORIZONTAL EDGE POLISHER FOR ROUND AND STRAIGHT PROFILES UP TO A 10CM THICKNESS 

 

This machine is proposed in 2 basic versions: LTZ 821 and LTZ 8221.

The LTZ 821 is equipped with:

  • no. 1 CALIBRATION MANDREL to gauge thickness at an adjustable depth (max. 60 mm). The  mandrel can be adjusted both laterally and longitudinally with respect to its supporting shaft; moreover, it can be rotated from 0° to 90°, and can also be used to carry out embeddings for the drip stone; for Ø 250 mm tools.

  • no. 2 OPPOSING MANDRELS INCLINED AT 45° to order chamfers and/or bevelling of various dimensions. Whenever you need to carry out rounded profile edges, these mandrels, thanks to the use of specific diamond  cone-trunk grinding wheels greatly helped the following shaping made by the oscillating mandrels by carrying out the milling of the edge; for Ø 130 mm wheels.

  • no. 8 OSCILLATING MANDRELS of which the first two are ready to be equipped with cup-shaped diamond  grinding wheels in order to carry out the shaping of the rounded profiles or the grinding of the flat, squared off or inclined profiles. The other five mandrels are equipped with polishing and smoothing abrasive grinding wheels. If necessary all the 7 mandrels can be equipped with abrasive grinding wheels; for Ø 150 mm wheels.

The LTZ 8221 is identical but equipped with an additional:

  • no. 2 outgoing CHAMFERING MANDRELS.

Several accessories and supplementary groups are available on request.

LTZ-drip.jpg
LTZ_chamf.jpg
LTZ_polish.jpg
bottom of page